There are different types of BB guns, and each has a different loading, maintenance and lubrication methods. Airsoft guns, whether it be of any type, must be installed properly to ensure it works brilliantly. Loading airsoft guns, airsoft guns in particular, need special care. Here's how you should load the airsoft gun.
filling gas
First of all, remove the magazine of your gas pistol and fill it with the necessary amount of gas, suitable for pistol models. While loading the magazine, do not forget that the magazine under the gas can be reversed. Allow the gas to be filled in the magazine - usually takes up to three seconds. However, in the case of journals with a high capacity, Gas process takes up to six seconds. While filling up gas, ensure that the magazine and the gas may be in line with each other and they are not tilted to one side.
Loading BBS
After filling the gas load BBS. For this you need to demolish magazine follower. After fully loading a magazine, insert it into the gun. Are you ready to start recording after a gun cock.
be careful about these things
If you notice that the magazine spills, and filling the gas, stop immediately and let it warm up for the accommodation of gas. Warm-up process can take up to six minutes. You should not use the magazine that gas gets filled easily. This will make the gas to escape and damage the gun, reducing its lifetime.
Why not?
Try to use a gun in a bright and sunny vrijeme.Hladno time compresses the gas filled inside the magazine, brings a lot of pressure with which the BBS otkaz.Niži pressure the higher will be the gas consumed. There is a high likelihood of any magazine or gun getting damaged if it is used very often in cold weather.
quality of BBS used in your gas gun (in all sorts of weapons and BB) matter a lot. Make sure you loaded with good quality BBs in your gas airsoft guns. Low quality BBs jammed inside the tube and are difficult to remove. Buy the size of the barrel BBS - BBS are usually 6mm in size. Proper use of firearms can ensure perfect operation.
